
Troubleshooting FPC Failures: Broken Traces, Cold Joints, and Delamination
Start with where the failure is: broken traces point to the bend area, cold joints to pads, finish and reflow, and blistering to moisture, lamination and storage.

Start with where the failure is: broken traces point to the bend area, cold joints to pads, finish and reflow, and blistering to moisture, lamination and storage.

Most FPC prototype rework comes from four places: bend areas, stiffeners, line width and spacing, and coverlay openings. Work through the 10-point checklist before you build.

A practical checklist for evaluating flexible circuit manufacturers: capability fit, engineering support, quality controls, communication and delivery reliability.