FPC MANUFACTURING CAPABILITIES

Define the Right Flexible PCB Construction

Review flex materials, layer construction, reinforcement and FPC assembly requirements. Our team evaluates the complete stack-up, mechanical drawing and acceptance criteria before confirming a manufacturing specification.

FABRICATION CAPABILITIES

FPC Manufacturing Capability Table

Verified factory capability values. The final specification is confirmed against your drawings and stack-up.

01

Layer Construction

Single-sided 1 layer, double-sided 2 layers, multilayer 1–10 layers (lamination); rigid-flex within 1–10 layers. Reviewed against routing, thickness and bend zones.

02

Substrates & Copper

Substrates PI, PET, LCP. Copper RA / ED, base copper 1/6 oz–4 oz. Reviewed for electrical loading and bending needs.

03

Local Reinforcement

PI, FR-4, steel or PET stiffeners by location and thickness. Bonding tolerance manual ±0.3 mm, fixture ±0.2 mm. Adhesive 3M, TESA, NITTO.

04

Surface Finish

Electroplated nickel/gold: Ni 3–7 µm, Au 0.03–2 µm. Electroless nickel / immersion gold: Ni 2–7 µm, Au 0.03–0.1 µm. OSP film 0.2–0.5 µm.

05

Outline & Bend Requirements

Min line width/spacing: no buried vias typical 35/35 µm, min 30/30 µm; multilayer with buried vias typical 55/55 µm, min 50/50 µm. Min hole 0.1 mm, drilling accuracy ±0.05 mm, annular ring ≥0.125 mm. Board thickness min 0.05 mm, tolerance ±0.03 mm.

06

FPC Assembly

SMT on flex: min chip / LED 0201; IC / connector, QFP / QFN min pitch 0.4 mm. Lead-free / halogen-free no-clean soldering. Boards: FPC, rigid-flex, PCB.

07

Base Material Width

250 mm / 305 mm / 500 mm.

08

Coverlay & Solder Mask

Coverlay bonding tolerance typical ±0.15 mm, minimum ±0.1 mm; window to trace ≥0.1 mm. Solder mask minimum bridge 0.1 mm, minimum opening 0.075 mm, thickness 10–25 µm.

09

Flex Cycles

Typical 100,000 cycles; maximum 500,000 cycles.

10

Sample Lead Time

Single-sided 2–3 days; double-sided 3–4 days; multilayer 6–8 days; FPC + SMT 8–10 days.

11

Mass Production Lead Time

Single/double-sided 5–7 days; multilayer 9–11 days; FPC + SMT 12–13 days.

12

EMI Shielding

EMI shielding film NFC (Ferrite: TDK, NEC, TATSUTA, LAIRD).

13

Test Equipment (15)

2.5D measuring instrument, flying probe tester, film thickness tester, metallographic microscope, solder pot, LCR tester, micro-ohmmeter, conductivity meter, pH meter, vector network analyzer, thermal shock chamber, salt spray tester, peel strength tester, O/S tester, AOI tester.

14

Plant

Shenzhen Bao'an Songgang; about 50 staff; 2,300 m² plant. Main products: FPC / FPCA / PCB / PCBA.

15

Minimum order quantity (MOQ)

No strict MOQ — prototype-friendly, from NPI pilot builds to mass production.

Engineering and project management office of the flex circuit factory

ENGINEERING REVIEW

Resolve the Details Before Production

The same line width or layer count can require different processes when the substrate, copper, coverlay and reinforcement change. We review these together instead of treating isolated limits as a build guarantee.

Stack-up & Mechanical Fit

Confirm overall thickness, connector interfaces, bend zones and stiffener transitions against the drawing.

Inspection & Acceptance

Agree visual, dimensional and electrical test criteria, plus any records or sample approvals required.

Assembly & Procurement

Include the BOM and placement data for FPCA. Review component availability through our component sourcing service.

Send Files for Capability Review

CAPABILITY FAQ

Questions for Your Technical Review

A complete fabrication package helps us assess what can be built and how it should be inspected.

01

Can you confirm minimum trace or drilling limits?

Send the full stack-up, copper construction and drawing. Feasibility depends on their combination, so limits are confirmed for the actual design.

02

Can we use a different substrate or finish?

Tell us the material grade and finish requirement. Availability and process suitability are reviewed before quotation and approval.

03

How are dynamic bending requirements reviewed?

Provide bend location, radius, movement and expected cycles. Construction and validation requirements are agreed for the intended application.

04

Can sourcing and assembly be quoted together?

Yes. Provide the BOM, placement data, approved parts and assembly requirements alongside the bare circuit files. Visit Component Sourcing for the file checklist.

FPC PROGRAM WORKFLOW

From Gerber Files to Shipped Panels

A structured workflow keeps DFM, prototyping, production checkpoints and export preparation aligned.

01 / DFM REVIEW1

Manufacturability Review

Stack-up, bend radius, stiffener transitions and impedance routing checked against your Gerber data.

REPLY WITHIN 24 HOURS
02 / PROTOTYPING2

Prototype Lead Times by Process

Function and fit verification panels built on the same lines as volume production. Prototype lead times: single-sided 2–3 days; double-sided 3–4 days; multilayer 6–8 days; FPC + SMT 8–10 days.

SAMPLE LEAD TIMES
03 / FABRICATION3

Volume Fabrication with Inline QC

First article inspection, AOI after etching and O/S testing.

FIRST ARTICLE + O/S TEST
04 / ASSEMBLY4

SMT on Flex

Carrier-fixture SMT for ICs, LEDs and passives with AOI and functional checks.

TURNKEY OR CONSIGNMENT
05 / DELIVERY5

Packing & Export Coordination

Vacuum packing, labeled cartons and export documents prepared to your specification.

EXPORT READY

START A PROJECT

Discuss Your Flex Circuit Program

Share your stack-up, bend requirements, target quantity and schedule. We will reply with a DFM review, quotation and prototype plan within 24 hours.

Email
info@zeyuntechglobal.com
PHONE / WHATSAPP / WECHAT
+86 138 2316 9854
Address
Shenzhen, China
Hours
Mon–Fri, 9:00–18:00 China Standard Time

FPC & FPCA PROJECT INQUIRY

Send Your Project Details

For bare flex, include drawings, dimensions and inspection requirements. For FPCA, add the BOM and placement data.

0/300
0/300
0/2000

Email drawings, Gerber files and BOM to info@zeyuntechglobal.com with your company or project name.

0/300
0/300
0/300