
Rigid-Flex Circuit
Rigid-flex circuits that combine flexible and rigid sections in one board, built in the 1–10 layer range on PI, PET or LCP.
FPC PRODUCT CATALOG
Explore representative flexible circuit and assembly builds, including custom outlines, contact interfaces and local reinforcement. Final construction, materials and acceptance criteria are confirmed against your drawings.

Rigid-flex circuits that combine flexible and rigid sections in one board, built in the 1–10 layer range on PI, PET or LCP.

Multilayer flex circuits built up to 10 layers on PI, PET or LCP, with 30/30 µm minimum line width and spacing and 0.1 mm minimum holes.

Flexible circuit example with a dark coverlay and exposed contact pads. Confirm stack-up, contact finish, coverlay openings and bend conditions against your drawing.

LED-bearing flexible circuit assembly example. Share the BOM, LED orientation, placement data and electrical or optical acceptance requirements for an FPCA quote.

Flexible circuit example with exposed contact areas for a custom battery interface. Contact geometry, current requirements, reinforcement and insulation need design review.

Multi-conductor flexible interconnect example for custom connection paths. Share contact pitch, routing, bend conditions and required quantities for engineering review.

Custom L-shaped flexible circuit example with exposed contact interfaces. Outline, bend zones, contact dimensions and reinforcement are specified to your assembly.

Flexible circuit strip with local steel reinforcement. Discuss stiffener location, attachment, flatness and interface thickness against your mechanical drawing.

Flexible circuit assembly example with a QFP package and mounted components. BOM, placement data, assembly drawings and inspection needs are reviewed for each FPCA project.

Elongated flexible circuit with exposed contact fingers and locally reinforced interfaces. Send connector dimensions, bend requirements and quantities for a custom review.

Folded flexible circuit example with a board-to-board connector interface. Custom outlines, bend zones and connector reinforcement are reviewed against your assembly drawing.

Cost-effective single-sided flexible circuit on polyimide substrate, built for static bending and compact device layouts. Ideal for consumer electronics, sensors and control modules with OEM customization support.
FPC CATEGORIES
These photos show example geometries and interfaces. Select a build to discuss your drawing, rather than ordering a fixed specification.

Round panel format with multiple flexible circuit outlines. Ask about your panel layout and construction.

Custom L-shaped outline with exposed contact interface. Share your mechanical drawing for review.

Dark coverlay with exposed contact pads. Confirm the stack-up, finish and bend requirements.

Local reinforcement around interface areas. Specify stiffener material, thickness and attachment.

Flexible conductors joining separated interfaces. Bend life and routing require application-specific review.

Example flex with mounted components. Send a BOM, placement files and assembly requirements.