Flex circuit in curled position demonstrating dynamic flexing capability
Rigid-Flex Circuits

Rigid-Flex Circuit

Rigid-flex circuits that combine flexible and rigid sections in one board, built in the 1–10 layer range on PI, PET or LCP.

Specifications

Layer Count
1–10 (rigid-flex included)
Min Trace/Space
30/30 µm (min); 50/50 µm with buried vias
Substrates
PI / PET / LCP
Copper Thickness
RA/ED, 1/6 – 4 oz
Min Hole Diameter
0.1 mm
Finished Thickness
Min 0.05 mm
Stiffeners
PI / FR-4 / Steel / PET
A rigid-flex circuit combines flexible sections with rigid sections in one board, so the connectors between separate boards are no longer needed and three-dimensional assemblies stay reliable.
Rigid-flex boards are built in the 1–10 layer range. Minimum line width and spacing is 30/30 µm without buried vias, and 50/50 µm with buried vias on multilayer stacks. Minimum hole diameter is 0.1 mm.
Base materials are PI, PET and LCP. Copper is RA or ED, from 1/6 oz to 4 oz. Finished thickness starts at 0.05 mm. Stiffeners in PI, FR-4, steel or PET support the rigid areas and connector zones.
Lead time is quoted for each project from your Gerber files, layer count and delivery target.
To get a quote, send your Gerber files — the team will review the stack-up and reply.